Instructions
1. Prepare and cut the EVA film into right size according to the following structure:
glass+EVA film + glass
2. Put the overlapped glass into silicon bag and seal silicon bag well.
3. Activate vacuum pump for 5-8min till vacuum value reach -0.095Mpa to double checking the vacuum is good.
4 Set up the laminating temp. and time and start heating.The following data based on 5mm glass +0.40mm EVA +5mm glass.
|
Heating speed
|
Temp. and holding time
|
Vaccum Value
|
First section
|
2℃/min
|
60℃
|
25mins
|
-0.095MPA
|
Second section
|
2℃/min
|
80℃
|
30mins
|
-0.095MPA
|
Third section
|
2℃/min
|
110℃
|
30mins
|
-0.04MPA
|
Remark: The above curves only for reference, the user should do some adjusts according to the process surroudings(temperature and humidity), glass area, glass thicknes,glass type and the machine itself.